HP Photosmart 612 - Manual (Page 43)

Sharing and printing images 35
Unloading images without using
the camera software
If you are away from home, you can unload images to a computer
that does not have the camera software installed on it.
Note Make sure that the computer has a USB port and
that its operating system is Windows 2000 or
Windows ME or later, or Macintosh OS 8.6 or later.
To unload images to a Windows or Macintosh computer
1 Change the camera's PC Connect Mode to Disk Drive. For
more information, see “Changing the PC Connect Mode
setting” on page 31.
2 Connect the camera to the computer with the USB cable.
3 Turn on the camera. The letters PC appear in the status LCD
to indicate that the camera is connected to the computer. The
computer recognizes the camera as a disk drive.
4 Use the following procedure to access your images as files:
• Windows: Double-click the icon for the newly assigned disk
drive in My Computer or navigate to the drive letter in
Windows Explorer. Use the Copy and Paste commands to
transfer selected images to your hard drive.
• Macintosh: Double-click the icon for the newly assigned
disk drive which appears on the desktop, and then drag and
drop the selected files to your hard drive.
SwUG.book Page 35 Tuesday, September 25, 2001 1:30 PM