HP OMNIBER 718 HP 37718A User Manual
Page 118
108
Storing, Logging and Printing
Logging Results
•
Optional Internal printer fitted into the instrument front cover
(Option 602)
•
External HP-IB printer (option 601)
•
External RS-232-C printer (option 601)
•
External Parallel Port printer (option 601)
•
Disk Drive
HOW TO:
1
Choose LOGGING [ON] - enables the logging of results and alarms.
2
Choose LOGGING PERIOD - determines how regularly the results
and alarms are logged.
USER PROGRAM provides a choice of 10 minutes to 99 hours.
3
Choose RESULT LOGGED - allows you to log all results to or choose
only those results you require.
4
Choose WHEN - allows you to choose to only log when the error count
for the logging period is greater than 0. If the error count is 0 then the
message NO BIT ERRORS is displayed.
5
Choose CONTENT - allows you a choice of error results to be logged.
Error Results, Analysis or Error and Analysis (ER & ANAL)
and
Period, Cumulative or Period and Cumulative (PER & CUMUL).
6
If LOG ERROR SECONDS [ON] is chosen a timed and dated message
is logged each time an error second occurs (excessive occurrences of
error seconds during the logging period will result in heavy use of