HP OMNIBER 718 HP 37718A - Manual (Page 138)

128
Using Instrument and Disk Storage
Storing Configurations in Instrument Store
Storing Configurations in Instrument
Store
Description You can store measurement settings which are used regularly and recall
them with a single operation.
One preset store is provided which cannot be overwritten, STORED
SETTING NUMBER [0]. This store is used to set the instrument to a
known state, the FACTORY DEFAULT SETTINGS.
HOW TO: 1 Set the HP 37718A to the configuration you wish to store.
2 Choose the STORED SETTING NUMBER to receive the
configuration.
3 Choose LOCK .
4 Choose ACTION to store the configuration in the chosen store.
5 To add a descriptive title see "Titling Configuration in Instrument
Store " page 129.
OFF
SAVE