HP OMNIBER 718 HP 37718A - Manual (Page 46)

36
Selecting Test Features
Setting up Signaling Bits
2 Choose SIGNAL or , and PAYLOAD TYPE
on the display
3 Choose TEST SIGNAL or on the
display.
4 Set the A,B bits (for D4 and SLC-96) and A,B,C,D bits (for ESF) as
required.
SONET Operation
1 Choose on the display.
2 Choose MAPPING or and VT PAYLOAD
on the display
3 Choose TEST SIGNAL or on the
display
.
4 Set the A,B bits (for D4 and SLC-96) and A,B,C,D bits (for ESF) as
required.
DS1 DS3 STRUCTURED
MAIN SETTINGS
56 kb/s Nx56 kb/s STRUCTURED
SETTINGS
SONET TRANSMIT
ASYNC DS1 DS3
STRUCTURED MAIN SETTINGS
56 kb/s Nx56 kb/s STRUCTURED
SETTINGS