HP AD117-9003A-ED3 - Manual (Page 86)

Figure 4-57 Reinstalling the Power Connectors
9. Replace the following server components:
•
PCI card cage. See “Replacing the PCI Card Cage” (page 72)
• Server fans. See “Replacing a Server Fan” (page 48)
• Processors. See “Replacing a Processor” (page 65)
• Processor airflow guide. See “Replacing the Processor Airflow Guide” (page 56)
• Memory DIMMs. See “Installing DIMMs” (page 59)
• Memory airflow guide. See “Replacing the Memory Airflow Guide” (page 54)
10. Replace the top metal cover. See “Replacing the Top Metal Cover” (page 44) .
11. Reconnect all of the power and external cables.
12. Power on the server. See
“Powering On the Server” (page 38) .
13. Boot to EFI.
14. Respond YES to prompts regarding copying information onto the new I/O baseboard.
Primary system ID values are undefined.
Do you want to copy the valid system ID values to the new board? (y/[n])
Y
15. Enter service mode.
Shell> sysmode service
Current System Mode: ADMIN
You are now in SERVICE mode.
16. Use the sysset command to enter the product data:
Shell> sysset prodname "server rx2620"
17. Use the syssetcommand to verify all values are set:
Shell> sysset
System Information:
Manufacturer: hp
Product Name: server rx2620
Product Number: AB332A
Secondary Product Number is Identical
Serial number: US51884101
Secondary Serial Number is Identical
86 Removing and Replacing Components