HONDA Outboard Motor BF115A User Manual
Page 48
46
OPERATION
N (neutral)
CONTROL
LEVER
FAST IDLE BUTTON
If the engine is not properly
warmed-up bef ore raising the
engine speed, the buzzer and
overheat indicator may activate,
and the engine speed will be
automatically reduced.
TAKING CARE OF
UNEXPECTED PROBLEMS
The cooling system may f reeze in
areas where the temperature
reaches 32°F (0°C) or below.
Cruising at high speed without
warming the engine up may cause
engine damage.
During the warm-up period, check
the oil pressure indicator (p.
overheat indicator (p.
), and
cooling system indicator (p.
If the fast idle control was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
Before getting under way, allow
the engine to warm up sufficiently
to ensure good performance.
Above 41°F (5°C), warm up the
engine for at least 3 minutes.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
on
Below 41°F (5°C), warm up the
engine for at least 5 minutes at
2,000 rpm. Push the fast idle
button then move the control lever
forward or reverse to open the
throttle and achieve approximately
2,000 rpm.
5.
4.
05/02/22 12:38:16 31ZW5601_047