HONDA Outboard Motor BF115A - Manual (Page 96)

90 A
94
Replacement
TAKING CARE OF UNEXPECTED PROBLEMS
‘‘90A’’MARK
SPARE FUSE
FUSE (90A)
FUSE CASE LID
ACG Fuse
Disconnect the battery cable at the
battery negative (-) terminal bef ore
replacing the f use.
Failure to do so may cause a short
circuit.
Remove the old fuse by removing
two 5 mm screws.
A spare fuse is located on the reverse
side of the fuse case lid and tightened
with two 3 mm screws.
When the new fuse is set as a spare
fuse on the reverse side of the fuse
case lid, set the fuse so that you can
see the ‘‘90 A’’ mark on it. Remove the fuse case lid.
Stop the engine and disconnect the
battery cable.
Remove the engine cover.
Install a new fuse with the ‘‘90 A’’
mark downward, reinstall the two
5 mm screws.
ACG FUSE:
After finishing replacement, install
the fuse case lid with its hook
toward the engine side.
Be sure to check the fuse case lid
is securely locked.
Reinstall the engine cover.
Reconnect the battery.
1.
2.
3.
4.
5.
6.
7.
8.
9.
05/02/22 12:45:37 31ZW5601_095