HONDA Outboard Motor BF115A - Manual (Page 72)

70
Lubrication Points
SERVICING YOUR OUTBOARD MOTOR
TRANSOM ANGLE
ADJUSTING ROD/
SWIVEL CASE
SHIFT SHAFT
PROPELLER SHAFT
TILT BRACKET
TILT SHAFT
SHIFT ARM
THROTTLE ARM/
SHIFT ARM SHAFT THROTTLE REEL
Apply Honda Marine Corrosion Inhibitor (or equivalent) to all areas under the engine cover and any exposed metal
surfaces except the belts.
Apply anticorrosion oil to pivot surfaces where grease
cannot penetrate.
Apply marine anticorrosion grease to the following parts:
Lubrication interval:
After the first 20 hours or 1 month, then every 100 hours
or 6 months. (Refer to the maintenance schedule page
). 61
05/02/22 12:41:43 31ZW5601_071