Panel-mount type – HONDA Outboard Motor BF115A User Manual

Page 46

Advertising
background image

44

Panel-Mount Type

OPERATION

EMERGENCY STOP
SWITCH

LANYARD

SWITCH CLIP

TAKING CARE OF
UNEXPECTED PROBLEMS

The engine will not start or run,
unless the clip is in the switch.

The emergency stop switch clip
and lanyard system is a safety
device that will stop the engine if
you fall away from the controls
while operating the boat.

Always attach the lanyard to your
PFD, or to your wrist, before
starting the engine.

Put the emergency stop switch clip
in the emergency stop switch, and
attach the lanyard to your PFD
(Personal Flotation Device) or to
your wrist, as shown.

During the warm-up period, check
the oil pressure indicator (p.

),

overheat indicator (p.

), and

cooling system indicator (p.

).

If the fast idle lever was used to
warm up the engine, gradually
lower the lever as the engine
warms up.

If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to

on

p.

and

.

When the fast idle lever is fully
lowered, the control lever can be
moved away from the N (neutral)
position.

1.

95

96

6.

33

33

34

05/02/22 12:38:01 31ZW5601_045

Advertising