Removal from storage – HONDA Outboard Motor BF115A User Manual
Page 88
Advertising
86
REMOVAL FROM STORAGE
STORAGE
PROTECTOR
BEFORE
OPERATION
Cover the outboard motor to keep out
dust. Do not use sheet plastic as a
dust cover. A nonporous cover will
trap moisture, promoting rust and
corrosion.
Check your outboard motor as
described in the
chapter of this manual.
If the cylinders were coated with oil
during storage preparation, the
engine may smoke briefly at startup.
This is normal.
If it is necessary to store the outboard
motor horizontally, drain the vapor
separator (p.
), and drain the
engine oil (p.
), before removing
the outboard motor from the boat.
Rest the motor on a cushion of
protective material.
05/02/22 12:44:09 31ZW5601_087
Advertising