HP 3000dtn - Manual (Page 73)

ENWW
6-7
z Do not use paper that is heavily textured or does not accept ink
well. This type of paper can cause poorly filled graphics or text.
z The document margins must match or exceed a margin setting of
4 mm (0.13 inch).
Configuring trays
When you print a document, you can allow the printer to select the tray
for the print job, or you can select a specific tray in the printer driver for
the print job. These settings are available in the Source drop-down
menu in Windows printer drivers and the All pages from pop-up menu
in the Mac OS printer driver.
If you do not select a tray in the printer driver, the printer automatically
selects a tray based on the media sizes configured in the printer—either
in the LCD control panel for Tray 1 or by the length and width guides in
Tray 2 or Tray 3. If neither the media type nor the media size settings
have been changed from the default settings, the printer draws A4/letter
from Tray 1. For Tray 2 and Tray 3, the printer looks for the default type,
and uses the media width and media length guide settings to determine
the media size.
For information about configuring media sizes and types for trays, see
“
To set media size and type in the LCD control panel .”
Loading Tray 1
Use Tray 1 for printing envelopes, cards, custom size media, and heavy
media up to 0.52 mm (0.02 inch) thick. Tray 1 provides a
straight-through paper path that allows the printer to handle heavy or
thick media. A straight-through paper path does not force the media to
curve or bend as it travels through the printer.
Note If you have purchased the optional multipurpose tray, remove the
single sheet feed unit from the Tray 1 location and install the
multipurpose tray. To use the multipurpose tray, see “
To load media
in the optional multipurpose tray “ or “ To print on envelopes and
cards using the optional multipurpose tray ” for more information.