HP 3000dtn - Manual (Page 83)

ENWW
6-17
Printing on envelopes and cards
Use Tray 1 to print envelopes and cards. If the optional multipurpose
tray is installed in the Tray 1 location, you can load up to 10 envelopes
or 10 cards.
Note If your software application supports printing envelopes or cards,
follow the application's instructions to print the envelope or card.
To print on envelopes and cards using Tray 1
1 In the printer driver, select Manual Feed as the media source, and
then select the envelope or card size.
Note For more information about configuring settings in the printer driver,
see “
Using the printer driver .”
2 Print the document.
3 When the LCD control panel displays MANUALLY LOAD [TYPE]
[SIZE] , insert one envelope or card of the correct size and type
along the left side of Tray 1. Envelopes should be placed with the
flap facing down and the stamp corner against the left side of the
tray. For more information, see “
Loading Tray 1 .”
4 After each item prints, the printer prompts you to load another
envelope or card. Load envelopes or cards as needed until the
printer finishes printing.
To print on envelopes and cards using the optional
multipurpose tray
Note The optional multipurpose tray is installed in the Tray 1 location.
1 Insert up to 10 envelopes or cards into the multipurpose tray, and
position them against the right side of the tray. Envelopes should be
placed with the flap facing down and the stamp corner against the
right side of the tray.
For more information about loading media, see “ Selecting and
loading print media .”
2 In the printer driver, select Tray 1 as the media source, and then
select the envelope or card size.
3 Print the document.