HONDA 2010 Insight - Manual (Page 108)

Press the SEL/RESET button to see
the selections.
Select AUTO, KM, or MILES by
pressing the INFO (
/ ) button,
then enter your selection by pressing
the SEL/RESET button.
AUTO: When you press the km/mile
change knob in the instrument panel
to switch the speedometer reading
between miles per hour (mph) and
kilometers per hour (km/h), the
displayed measurement in the trip
computer and trip information, also
switches to kilometers or miles
depending on the selected
speedometer reading.
KM: The displayed measurement in
the trip computer and trip
information is set to kilometers.
MILES: The displayed measurement
in the trip computer and trip
information is set to miles.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘DISPLAY KM/MILES
SETTING INCOMPLETE’’ message
appears, go back to ‘‘DISPLAY KM/
MILES’’ and repeat the procedure
again.
Multi-Information Display
102