Instrument panel indicators – HONDA 2010 Insight User Manual

Page 72

Advertising
background image

If this happens, pull to the side of the
road when it is safe, check which tire
has lost pressure, and determine the
cause. If it is because of a flat tire,
replace the flat tire with the compact
spare (see page

), and have the

flat tire repaired as soon as possible.
If two or more tires are underinflated,
call a professional towing service.
Refer to page

for more

information.

If this indicator begins to flash,
there is a problem with the tire
pressure monitoring system
(TPMS). You will also see a
‘‘CHECK TPMS SYSTEM’’
message on the multi-information
display. The indicator continues to
flash for a while (approximately 1
minute), then stays on. If this
happens, have your dealer check
the system as soon as possible.
For more information, see page

.

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.

This indicator has two functions:

If it comes on while driving, it
indicates that one or more of your
vehicle’s tires are significantly low
on pressure.

You will also see a ‘‘CHECK TIRE
PRESSURE’’ message on the multi-
information display (see page

).

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If it comes on at any other
time, it indicates a problem in the
integrated motor assist (IMA)
system. With the IMA indicator on,
the vehicle may not accelerate as it
normally does. Have the vehicle
checked by the dealer as soon as
possible.

You will also see a ‘‘CHECK IMA
SYSTEM’’ message on the multi-
information display.

See pages

and

.

1.

2.

321

322

328

412

387

329

Instrument Panel Indicators

Low Tire Pressure/
TPMS Indicator

IMA System Indicator

Auto Idle Stop Indicator

66

Advertising