HONDA 2010 Insight - Manual (Page 371)

CONTINUED
Open the hatch.
Push on the area of the trim as
shown in the illustration above to
detach the upper hooks from the
light assembly.
Pry on the gap between the trim
and light assembly carefully with a
flat-tipped screwdriver to detach
the lower hooks. Make sure that all hooks are
removed from the light assembly.
Unclip the top half of the trim
from the body by pulling it out.
Then unclip the bottom half. 1.
2.
3. 4.
Lights
Replacing the Rear Bulbs
Ma
int
e
na
nce
365
HOOKS
TRIM
HOOKS
CLIP
CLIP