HONDA 2010 Insight - Manual (Page 146)

To remove a head restraint for
cleaning or repair, pull it up as far as
it will go. Push the release button,
then pull the restraint out of the seat-
back.
When reinstalling a head restraint,
put the legs back in place. Then
adjust it to the appropriate height
while pressing the release button.
Make sure the head restraint locks
in position when you reinstall it.
When a passenger is seated in the
rear seat, the head restraint should
be adjusted up or down, to match the
passenger’s height.
The Seat-back must be folded
forward (see page
) to get ceiling
clearance for removal of the head
restraints.
142
For Rear Seat Head Restraints
Removing the Head Restraint
Seats
140
LEGS SEAT-BACK SEAT-BACK LEGS
RELEASE
BUTTON
Rear Outer Position
CUSHION
Rear Center Position
CUSHION
RELEASE
BUTTON
Failure to reinstall the head
restraints can result in severe
injury during a crash.
Always replace the head
restraints before driving.