Configuring rmon statistics (cli example), Configuring rmon statistics (bbi example) – HP 445946-001 User Manual
Page 156
Remote monitoring
156
Configuring RMON Statistics (CLI example)
1.
Enable RMON on each port where you wish to collect RMON statistics.
>> /cfg/port 20/rmon (Select Port 20 RMON)
>> Port 20 RMON# ena (Enable RMON)
>> Port 20 RMON# apply (Make your changes active)
>> Port 20 RMON# save (Save for restore after reboot)
2.
View RMON statistics for the port.
>> /stats/port 20 (Select Port 20 Stats)
>> Port Statistics# rmon
------------------------------------------------------------------
RMON statistics for port 20:
etherStatsDropEvents: NA
etherStatsOctets: 7305626
etherStatsPkts: 48686
etherStatsBroadcastPkts: 4380
etherStatsMulticastPkts: 6612
etherStatsCRCAlignErrors: 22
etherStatsUndersizePkts: 0
etherStatsOversizePkts: 0
etherStatsFragments: 2
etherStatsJabbers: 0
etherStatsCollisions: 0
etherStatsPkts64Octets: 27445
etherStatsPkts65to127Octets: 12253
etherStatsPkts128to255Octets: 1046
etherStatsPkts256to511Octets: 619
etherStatsPkts512to1023Octets: 7283
etherStatsPkts1024to1518Octets: 38
Configuring RMON Statistics (BBI example)
1.
Configure ports.
a.
Click the Configure context button.
b.
Select Switch Ports (click the underlined text, not the folder).