Task 1: configure switch a (bbi example) – HP 445946-001 User Manual
Page 181
High availability
181
5.
Enable tracking on ports. Set the priority of Virtual Router 2 to 101, so that it becomes the Master.
/cfg/l3/vrrp/vr 1 (Select VRRP virtual router 1)
>> VRRP Virtual Router 1# track/ports/ena (Set tracking on ports)
>> VRRP Virtual Router 1 Priority Tracking# ..
>> VRRP Virtual Router 1# ..
>> Virtual Router Redundancy Protocol# vr 2 (Select VRRP virtual router 2)
>> VRRP Virtual Router 2# track/ports/ena (Set tracking on ports)
>> VRRP Virtual Router 2 Priority Tracking# ..
>> VRRP Virtual Router 2# prio 101 (Set the VRRP priority)
6.
Turn off Spanning Tree Protocol globally. Apply and save changes.
/cfg/l2/stg 1/off (Turn off STG)
>> Spanning Tree Group 1# apply
>> Spanning Tree Group 1# save
Task 1: Configure Switch A (BBI example)
1.
Configure ports and VLANs.
a.
Click the Configure context button.
b.
Open the Virtual LANs folder, and select Add VLAN.