HP 445946-001 - Manual (Page 79)

RSTP and MSTP
79
Configuring Rapid Spanning Tree Protocol (BBI example)
1. Configure port and VLAN membership on the switch, as described in the “Configuring ports and
VLANs (BBI example)” section in the “VLANs” chapter of this guide.
2. Configure RSTP general parameters.
a. Click the Configure context button on the Toolbar.
b. Open the MSTP/RSTP folder, and select General.
c. Select RSTP mode, and set the MSTP/RSTP state to ON.
d. Click Submit.