HP 445946-001 - Manual (Page 164)

Remote monitoring
164
Configure RMON Alarms (BBI example 2)
1. Configure an RMON Alarm group.
a. Click the Configure context button.
b. Open the Switch folder, and select RMON > Alarm > Add Alarm Group.
c. Configure RMON Alarm Group parameters to check
icmpInEchos,
with a polling interval of
60, a rising limit of 200, and a rising event index of 5. This configuration creates an RMON
alarm that checks
icmpInEchos
on the switch once every minute. If the statistic exceeds 200
within a 60 second interval, an alarm is generated that triggers event index 5.
2. Click Submit.