HP 445946-001 - Manual (Page 60)

VLANs
60
Multiple VLANS with tagging
The following figure shows only those switch-port-to-server links that must be configured for the example.
While not shown, all other server links remain set at their default settings.
Figure 8 Multiple VLANs with VLAN tagging
The features of this VLAN are described in the following table:
Table 10 Multiple VLANs with tagging
Component Description
Switch 1 Switch 1 is configured for VLANS 1, 2, and 3. Port 1 is tagged to accept traffic
from VLANs 1 and 2. Port 18 is tagged to accept traffic from VLANs 1, 2, and 3.
Port 20 is an untagged member of VLAN 2. Port 21 is tagged, and accepts traffic from
VLANs 1 and 3.
Switch 2 Switch 2 is configured for VLANS 1, 3, and 4. Port 2 is tagged to accept traffic from VLANS
3 and 4. Port 4 is configured only for VLAN 3, so VLAN tagging is off. Port 18 is tagged to
accept traffic from VLANs 1 and 3. Port 20 is an untagged member of VLAN 4. Port 21 is
tagged, and accepts traffic from VLANs 1 and 3.