Operation – Homelite UT10585 User Manual

Page 12

Advertising
background image

Page 12 — English

APPLICATIONS

You may use this product for the purposes listed
below:

Basic limbing, felling, and bucking

Removing buttress roots

WARNING:

Always shut off engine before fueling. Never add
fuel to a machine with a running or hot engine.
Move at least 30 ft. from refueling site before
starting the engine. DO NOT SMOKE! Stay away
from open flames or sparks. Failure to heed this
warning could result in serious personal injury.

FUEL AND REFUELING
HANDLING THE FUEL SAFELy

WARNING:

Check for fuel leaks. If any are found, correct
them before using the saw to prevent fire or
burn injury.

Always handle fuel with care; it is highly flam-
mable.

Always refuel outdoors and do not inhale fuel
vapors.

Do not let gasoline or lubricant come in contact
with skin.

Keep gasoline and lubricant away from the eyes.
If gasoline or lubricant comes in contact with
the eyes, wash them immediately with clean
water. If irritation is still present, see a doctor
immediately.

Clean up spilled fuel immediately.

Refer to

Refueling in the Specific Safety Rules

section of this manual

for additional safety infor-

mation.

OPERATION

PREMIUM EXACT MIX™ (50:1)

GASOLINE

LUBRICANT

1 Gallon (US)

2.6 oz.

1 Liter

20 cc (20 ml)

MIXING THE FUEL

This product is powered by a 2-cycle engine and
requires pre-mixing gasoline and 2-cycle lubri-
cant. Pre-mix unleaded gasoline and 2-cycle
engine lubricant in a clean container approved
for gasoline.

This engine is certified to operate on unleaded
gasoline intended for automotive use with an
octane rating of 87 [(R + M) / 2] or higher.



Do not use any type of pre-mixed gasoline/lubri-
cant from fuel service stations, this includes the
pre-mixed gasoline/lubricant intended for use
in mopeds, motorcycles, etc.



Use a high quality 2-cycle self-mixing lubricant
for air-cooled engines. Do not use automotive
lubricant or 2-cycle outboard lubricant.



Mix 2% lubricant into the gasoline. This is a 50:1
ratio.

Mix the fuel thoroughly and each time before
fueling.



Mix in small quantities. Do not mix quantities
larger than usable in a 30-day period. A 2-cycle
lubricant containing a fuel stabilizer is recom-
mended.

Advertising
This manual is related to the following products: