Hughes Direcway DW6000 - Manual (Page 47)

Chapter 2 • Installing the indoor equipment
1033295-0001 Revision 2
23
10. Click on Manual . A window appears showing the status of the
test, the isolation value, and the pass/fail result. Adjust the
antenna to achieve maximum transmit isolation. When the
unit consistently passes the manual cross-pol test as shown in
Figure 24, bolt down the antenna.
11. Click the Automatic cross pol button. If the unit passes the
automatic cross pol click Next. If it does not, repeak the
transmit isolation in manual mode. The Registration Server
Selection screen appears. See Figure 25.
Figure 22: Receive pointing results
Figure 23: Cross Pol