HP 220240 - Manual (Page 125)

5.3 Transparencies
Table 5–3 and Table 5–4 contain information on the sizes and specifications
of transparencies that can be used with the DEClaser 2200 plus printer.
Table 5–3: Transparency Sizes
Transparency Size Dimensions
A4 210 mm x 297 mm
Letter 8 ½ in. x 11 in.
Table 5–4: Transparency Specifications
Category Specification
Transparency weight 135 g/m 2 to 150 g/m 2 basis weight
(16 lb. to 36 lb.)
Thickness 0.095 mm to 0.115 mm
Heat tolerance 200°C (392°F) for 0.1 second
5.3.1 Special Considerations When Printing Transparencies
Observe the following requirements when printing on transparencies:
• Transparencies are usually fed manually.
If you are feeding
transparencies from a cassette, be sure they are high-quality
transparencies and meet the specifications listed in Table 5–4.
• Remove transparencies from the rear output tray as each one is printed
to prevent them from sticking to each other.
• Use the rear output tray.
5–8 Operator’s Guide