HP 220240 - Manual (Page 97)

Table 4–6 (Cont.): Changing and Saving Values
Operation Display Reads
6. Press until the
value equals -10.0.
NOTE: The value decreases
in steps of 0.5.
offsetX - 10.0
7. Press ✂ Enter
to enter
the new value.
offsetX =- 10.0 (momentarily)
offsetX offsetY
8. Press
✁
once to scroll
the display to the offsetY feature.
offsetY autoNL o
9. Press ✂ Enter
to select
the offsetY feature.
offsetY =+ 0.0
10. Press until the
value equals -10.0.
NOTE: The value decreases
in steps of 0.5.
offsetX - 10.0
11. Press ✂ Enter
to enter
the new value.
offsetY =- 10.0 (momentarily)
offsetY autoNL o
12. Press to return
to the menu selections.
LAYOUT COPY/OVER
13. Press three
times to reach the
NVRAM SAVE menu.
SAVE->NVRAM LOAD
14. Press ✂ Enter
to save
the offset values in
NVRAM.
OK (momentarily)
SAVE–>NVRAM LOAD
4–12 Operator’s Guide