HP 220240 - Manual (Page 38)

2.6.3 Printing Preprinted and Prepunched Media in Simplex
Mode
To print forms, letterhead paper, or punched paper in simplex mode, load
the media faceup, with the top edge of the paper nearest to the printer. (The
procedure for printing forms in duplex mode is different from the procedure
for simplex mode. See Section 2.7.2.)
You can also load one tray for simplex printing and one tray for duplex
printing and then use commands to select the appropriate tray.
2.7 Printing in Duplex Mode
Figure 2–3 shows the paper path used during printing in duplex mode. The
duplex mode can be selected using a command from the host computer, or
by using
Duplex
on the control panel.
NOTE:
Although you can select duplex mode using a command from the
host computer, you cannot select the printout delivery (envelope/faceup or
duplex/ facedown) from the host; positioning the printout selector is the only
way to select the correct printout delivery.
Figure 2–3: Duplex Paper Path
MLO-005127 (Figure 2-12; 11 picas)
Operating Information 2–11