HP 220240 - Manual (Page 245)

• If a font used on the page is deleted to free up memory for another
requirement, the DEClaser 2200 plus printer may cause a page break.
It does not try to transfer the display list to bitmap memory like the
LN03 PLUS would. If you encounter page breaks, set the paint feature
value to Full (see Table 4–12).
NOTE:
The Full value can be activated only if at least 1 MB of optional
RAM is installed in the printer.
• When a font report is issued, the DEC Supplemental character set
is now reported as 245 (94-character set %5), rather than 01O (94-
character set <) which is now the User Preference character set. The
DEClaser 2200 plus printer has three Hebrew character sets and the
Legal character set resident in the printer. This also modifies the font
status report because more fonts are included.
• The DEClaser 2200 plus printer enforces the Common Font File Format
(CFFF) syntax and semantics more strictly than the LN03. Therefore,
some fonts containing errors, which load correctly on the LN03, may
not load properly on the DEClaser 2200 plus printer and will generate
an error report.
• The DEClaser 2200 plus printer can save more user default settings in
NVRAM than the LN03 can save using DIP switches. Therefore, when
a power-up reset command is received, more values can be restored in
the DEClaser 2200 plus printer. To ensure that values are not modified
during a power-up reset, save them to NVRAM whenever possible.
NOTE:
Contact your Digital sales representative for more information
about the DEClaser 2200 plus printer.
LN03 Compatibility D–3