Hitachi 61SDX01B - Manual (Page 23)

CONNECTING EXTERNAL AUDIO SOURCES
23
cables should be made from coaxial shielded wire.
Before Operating External Video Source
The input mode is changed every time the INPUT button is pressed as shown below. Connect an external source
to the INPUT terminal, then press the INPUT button as necessary to view the input source. (See page 27.)
INPUT MODE SELECTION ORDER
NOTE: When TV is set to VIDEO and a video signal is not received from the VIDEO INPUT JACK on the jack
panel of the TV (i.e., VCR/laserdisc player, etc. is not connected or the video device is OFF), the set will appear to
be OFF.