Connecting a stereo vcr or stereo laserdisc player – Hitachi 61SDX01B User Manual
Page 25
CONNECTING EXTERNAL AUDIO SOURCES
25
CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER
1. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the
TV set below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the INPUT button to view the program from the VCR or laserdisc player. The mode VIDEO disappears
automatically after approximately eight seconds.
5. Press the INPUT button to return to the previous channel.
Rear
Panel
of
Television
NOTE:
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played
back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line
output. (INPUT: 1 in example on page 13.) Refer to your VCR operating guide for more information on line input-
output connections.