Hitachi 61SDX01B User Manual
Page 26
CONNECTING EXTERNAL AUDIO SOURCES
26
CONNECTING A S-VIDEO VCR OR STEREO LASERDISC PLAYER
1. Connect the cable from the S-VIDEO OUT of the VCR OR laserdisc player to the INPUT (S-VIDEO) jack, as
shown on the TV set below.
2. Connect the cable from the AUDIO OUT R of the VCR or laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the INPUT button to view the program from the VCR or laserdisc player. The VIDEO icon disappears
automatically after approximately eight seconds.
5. Press the INPUT button to return to the previous channel.
Rear
Panel
of
Television
NOTES:
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played
back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but not that a
VCR cannot record its own video or line output. (INPUT: 1 in example on page 13) Refer to your VCR operating
guide for more information on the input-output connections.