Hitachi 61SDX01B - Manual (Page 60)

SET UP
60
AUTO CHANNEL SET
This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to skip
unused channels when using the CHANNEL UP ( ) or DOWN ( ).
If the EXIT button is pressed while the AUTO CHANNEL SET function is engaged, programming will stop. If two
antenna are connected, switch antenna inputs with the INPUT button and repeat AUTO CHANNEL SET for the
second antenna input.
Remember to select the correct SIGNAL SOURCE mode before using AUTO CHANNEL SET.
See CHANNEL MEMORY to add or to erase additional channels.
CHANNEL MEMORY
Use this function after AUTO CHANNEL SET to add or erase additional channels to the remote control CHANNEL
or buttons.