HP 1000C - Manual (Page 10)

1-6 Getting Started
From Floppy Disks in Windows 3.1
1. Start Microsoft Windows and make sure
no other Windows applications are
running.
2. Choose File in the Program Manager
window menu.
3. Choose Run from the File menu.
4. Insert Disk 1 into the disk drive A or B of
your computer.
5. At the Command Line box, type a:\setup or
b:\setup depending on where you insert
Disk 1.
6. Click on the OK button.
7. Follow the instructions that appear on the
screen to complete the installation of the
printer software.
From Floppy Disks in Windows 95
Turn on the printer before turning on the computer.
Windows 95 should recognize the attached printer
and walk you through the installation instructions.
If a screen with instructions does not appear, do the
following:
1. Close all running applications and disable
any anti-virus programs.
2. Click Start, then click Settings.
3. Select Printers from the Settings menu.
4. Double click Add Printer.
5. Click Next until you see a list of
manufacturers and printer models.
6. Click the Have Disk… button, insert Disk 1,
and follow the instructions on the
computer screen.
7. After installation, restart windows.
STEP 7: Align Cartridges and Printer Test
You should align the print cartridges whenever a
cartridge is installed. This ensures that black and
color inks will align when printed together on the
same text, line, or graphic.
1. Run the DJ1000C Toolbox software utility
by double clicking on the icon on the
desktop or in the program group.
2. Click the Maintenance tab, and select
Align Print Cartridges. Follow the
instructions on the computer screen.
You can select Print a Self-Test from the HP
DJ1000C Toolbox to test the printer set-up.
Chapter1 Page 6 Friday, March 14, 1997 9:42 AM