HP 1000C - Manual (Page 7)

Getting Started 1-3
STEP 4: Installing the Print Cartridges
Note: Use only recommended print cartridges (HP
part no. 51645A for black and HP part no. 51641A for
color). Both print cartridges are installed in the same
manner.
1. Press the Power button to turn on the
printer.
2. Open the printer cover. The print cartridge
cradle will move to the center of the
printer and the cartridge light flashes.
3. Remove the color print cartridge from its
packing box.
4. Gently remove the tape covering the ink
nozzles. Be careful not to touch the ink
nozzles or the copper contacts.
5. Lift up the print cartridge latch.
6. Insert the print cartridge into the cradle
slot and push down the cartridge firmly.
7. Push down the latch to secure the print
cartridge.
8. Remove the black print cartridge from its
packaging box and repeat steps 4 to 7.
9. Close the printer cover.
Note: If you did not install a recommended print
cartridge, or the print cartridge is not properly
installed, the print cartridge holder will move back to
the loading position, and the Change Cartridge
indicator will continue to blink.
Caution: The ink in the print cartridge has been
carefully formulated by Hewlett-Packard to ensure
superior print quality and compatibility with your
printer. Damage to the printer or the print cartridge
resulting from modifying or refilling the print
cartridge is not the responsibility of Hewlett-Packard.
STEP 4
PROFESSIONAL SERIES H
1
2
6
7
4
Chapter1 Page 3 Friday, March 14, 1997 9:42 AM