HP 1000C - Manual (Page 9)

Getting Started 1-5
STEP 6: Installing the Printer Software
Before you can use the printer, you must install the
printer software. To install the printer software, you
need at least 8 Mb of RAM and Microsoft Windows
3.1x or 95 installed in your computer. Please refer to
page 4-2, “Hardware Compatibility” for hardware
requirements.
From Starter CD-ROM in Windows 3.1
1. Start Microsoft Windows and make sure
no other Windows applications are
running.
2. Put the Starter CD in your CD-ROM drive .
3. Choose File in the Program Manager
window menu.
4. Choose Run from the File menu.
5. At the Command Line box, type d:\install
or e:\install depending on which
represents your CD-ROM drive.
6. Click on the OK button.
7. Follow the instructions that appear on the
screen to complete the installation of the
CD.
8. Click on the Printer Driver to install your
printer driver.
9. After installation, restart windows.
From Starter CD-ROM in Windows 95
1. Close all running applications and disable
any anti-virus programs.
2. Put the Starter CD in your CD-ROM drive .
3. Your computer will recognize the CD and
run the setup. If it doesn’t, double click on
the CD icon in My Computer.
4. Follow the instructions that appear on the
screen to complete the installation of the
CD.
5. Click on the Printer Driver to install your
printer driver.
6. Follow the instructions. Click Have Disk.
7. Click Browse and select d:\driver\disk1 for
the English driver and d:\fdriver\disk1 for
the French driver.
Chapter1 Page 5 Friday, March 14, 1997 9:42 AM