HP 5300 - Manual (Page 163)

Index
Index-10 HP Smart Array 5300 Controller User Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: x-index
Codename: SilverHammer Part Number: 135606-005 Last Saved On: 10/8/02 11:29 AM
migration of, memory requirement
for 7-25
optimum values of 7-14
RAID and 7-13
supported values 7-13
striping data, defined D-2
summary
of controller features 1-4
of fault management features 1-8
of RAID methods D-10
Support Pack diskettes 8-2
Support Pack) 8-2
supported
CD-ROM drives H-1
hard drives, features of E-1
number of hard drives per channel E-1
number of hard drives per port C-1
number of logical drives per array 7-2
operating systems 1-4
RAID methods 1-4
stripe sizes 7-13
tape drives 1-4, H-1
symbols in text xi
system configuration 6-1
System Configuration Utility 5-6
system partition, creating 5-6
system ROM, updating 4-1
System ROMPaq 4-1
system, preventing electrostatic damage
to B-1
T
tape drives, support for 1-4, H-1
technical support xii
telephone numbers xii, xiii
termination
of hard drive H-2
of SCSI bus 3-4, C-1
third-party
hard drives H-3
partitioning tools 7-25
time needed
for data rebuild E-5
for expansion 7-21, 7-34
for extension 7-24
for migration 7-25, 7-35
troubleshooting See also POST messages
hard drive problems E-2
two- to four-channel adapter board,
illustrated 1-3
U
unrecoverable disk error message E-4
updating
device drivers 8-1
Insight Management Agents 8-2
options firmware 5-1
system firmware 4-1
system partition 5-6
upgrading
array accelerator 9-1
cache 9-1
hard drive capacity E-10
utilities
ACU 7-1
ACU 6.0 7-1
Array Diagnostic Utility E-4
CPQONLIN 7-1, 7-26
NetWare array configuration
utility 7-26
ORCA 6-3, 7-1
POST G-1
RBSU 6-1
System Configuration Utility 5-6
System ROMPaq 4-1
V
VHDCI cable 3-5
VHDCI connector on board, illustration
of 1-2
volume, creating, in NetWare 5-6