HONDA 08E02-SHJ-100B - Manual (Page 10)

10 of 12
AII 38137-38714 (0801) © 2008 American Honda Motor Co., Inc. - All Rights Reserved.
791209AB
7517192E
48. Bend the switch terminal as shown. 51. Connect the HFL harness 20-pin connector to the
switch.
7518010E
52. Install the switch assembled in step 50 to the roof
console with self-tapping screw, bushes, tapping
screw removed in step 25 and vehicle bushes.
53. Reinstall the console light to the roof console.
54. Using isopropyl alcohol on a shop towel, clean
the area where the EPT sealer will attach. Cut an
EPT sealer in half and attach one half to the
vehicle bracket as shown.
HFL TRIM
SWITCH
HFL
RETAINER
4 SELF-TAPPING
SCREWS,
3 x 10 mm
SELF- TAPPING
SCREW
BUSHES
SWITCH
ROOF
CONSOLE
VEHICLE
BRACKET
EPT SEALER
(Cut in half.) EPT SEALER
ROOF CONSOLE
OPENING
HFL HARNESS
20 -PIN
CONNECTOR
HFL
RETAINER
RUBBER
BUMPER
SELF- TAPPING
SCREW (Reuse.)
VEHICLE
BUSHES
(Reuse.)
49. Insert the rubber bumper to the HFL retainer.
50. Assemble HFL retainer, switch, and HFL trim with
four 3 x 10 mm self-tapping screws.
SWITCH
TERMINAL
BACKSIDE OF THE SWITCH
SWITCH
TERMINAL
(Bend.)
SPEAKER
www.collegehillshonda.com