HONDA 08E02-SHJ-100B - Manual (Page 6)

6 of 12
AII 38137-38714 (0801) © 2008 American Honda Motor Co., Inc. - All Rights Reserved.
7517091E
7517101E
7517061E
23. Cut the template into template A and template B.
24. Remove the damper (two tapping screws).
SUNGLASSES
HOLDER
ROOF
CONSOLE
DAMPER
2 TAPPING
SCREWS
TEMPLATE A
TEMPLATE B
TEMPLATE
VEHICLE
BUSHES
TAPPING
SCREW
CAMSET
LOCK
2 RETAINING
TABS
25. Remove the sunglasses holder (tapping screw and
vehicle bushes).
26. Remove the pin and remove the camset lock (two
retaining tabs).
21. Using isopropyl alcohol on a shop towel, clean the
area where the EPT sealer will attach. Attach a
EPT sealer to secure the HFL subharness to the
vehicle panel.
22. Secure the HFL subharness to the vehicle
harness with three wire tie.
20. Secure the HFL subharness to the vehicle
harness with a wire tie.
7517080E
3 WIRE
TIES
HFL
SUBHARNESS
VEHICLE
HARNESS
WIRE TIE
HFL
SUBHARNESS
VEHICLE
PANEL
VEHICLE
HARNESS
EPT
SEALER
PIN
www.collegehillshonda.com