HONDA 08E02-SHJ-100B User Manual
Page 2
2 of 12
AII 38137-38714 (0801)
© 2008 American Honda Motor Co., Inc. - All Rights Reserved.
7518071E
TOOL AND SUPPLIES REQUIRED
#2 Phillips screwdriver
10 mm Combination wrench
10 mm and 14 mm Socket
Pushpin
Ratchet
3 mm, 4.5 mm, 6 mm, 9 mm, and 10 mm Drill bit
Eye protection (face shield, safety goggles, etc.)
File
Diagonal cutters
Scissors
Masking tape
Tape measure
Cardboard
Isopropyl alcohol
Shop towel
19 mm Holesaw
Drill
Utility knife
T15 Torx bit
Felt-tip pen
Illustration of the HFL Installed on the Vehicle
CONTOROL
UNIT
INSTALLATION
Customer Information: The information in this
installation instruction is intended for use only by
skilled technicians who have the proper tools,
equipment, and training to correctly and safely add
equipment to your vehicle. These procedures
should not be attempted by “do-it-yourselfers.”
1.
Make sure you have the anti-theft code for the
radio, then write down the frequencies for the
preset buttons.
2.
Disconnect the negative cable from the battery.
Control unit
HFL Blue Tooth Kit
P/N 08E00-E10-100
Switch
SWITCH
HFL
HARNESS
HFL
SUBHARNESS
FUSE
(2 A)
Accessory User's Information Manual
Plastic trim tool SILTRIMTL10
www.collegehillshonda.com