Handspring VisorPhone - Manual (Page 68)

62 Using VisorPhone as a Wireless Modem
Setting up VisorPhone as a wireless modem
To use your VisorPhone as a modem, you must subscribe to the data services
feature from your service provider and establish an ISP account or corporate
dial-up account.
1. Tap the Applications Launcher icon on the front of your handheld.
2. Tap the Prefs icon .
3. Tap Network in the pick list in the upper-right corner.
4. Enter the configuration information for your ISP.
Note: If your ISP is not on the Service pick list, tap the Menu icon ,
tap New on the Service menu, and enter the service name.
5. Check your settings by tapping Connect. When your settings work
properly, the Connect button changes to a Disconnect button.
To learn more about using your handheld with your ISP, see “Network
Preferences and TCP/IP Software” in the Visor Handheld User Guide.
Enter your User Name,
Password, and your
ISP’s phone number
Select your ISP
from the Service
pick list
Tap here to enter
advanced DNS and
IP Address settings