Setup – Humax PVR-9200T User Manual
Page 15
Advertising
**
This chapter describes how to set up the product. Select the most appropriate procedure for your convenience.
Note:
If you encounter any problem when setting up the product, please contact your local product distributor.
2.1 Connecting Aerial
1. Connecting TV
1. Connect a scart cable from the TV Scart on you’re the product to a scart connection on your TV set.
2. Connect your aerial to the Antenna In connection on the product.
3. Connect an RF (coaxial) cable from the TV/VCR (Loop out) output to the aerial input of your TV set.
4. Connect the mains plug of the product to a wall socket
**
2. Setup
GB 14
Advertising