Humax PVR-9200T - Manual (Page 33)

**
6.2 Recording schedule
You can set a programme to record automatically by going to Menu - Record - Recording Schedule.
1. Press the MENU button.
2. Select Record using the button and press the OK or
button.
3. Select Recording Schedule using the button and press
the OK or button to display the reserved recording list on
the screen.
**
Note: You can schedule recoding easily in Guide. Refer to Chapter
8.
1. Programming the PVR to record
1. Select a blank list and press the OK button to add a new
recording schedule.
2. Change the Channel and Date. Press the button to display
channel and date lists and select one item using the button
and the OK button. You can also select your desired channel
using the NUMERICAL (0~9) button.
3. Change Time using the button and the NUMERICAL (0~9)
button.
4. Select one of Repeat mode options among Once, Daily and
Weekly using the button.
5. Select Lock mode using the button.
6. Select the Save and press the OK button to complete entering.
7. Select the Cancel and press the OK button to cancel the reservation.
Note:
• You can reserve 2 programmes to record simultaneously.
• If the target channel is locked, restricted by watching time or parental control, you have to enter a password for
reservation.
6. Recording and Playback
GB 32