Humax PVR-9200T - Manual (Page 61)

**
1. i-Plate Display Time
You can set the duration of the Information box to be displayed.
1. Select i-Plate Display Time using the button and press the OK or button.
2. Select a value between 1 ~ 20 seconds using the button and press the OK button.
Note: When it is set to Disable, the i-Plate will not be displayed when the channel is switched.
2. OSD Transparency
You can set the transparency of On Screen Display.
1. Select OSD Transparency using the button and press the OK or button.
2. Select one option among Disable/25/50/75 using the button and press the OK button.
Disable Fully opaque screen
25, 50, 75 The bigger the number, the more tronsparent the screen.
3. Option in Channel List
You can set whether or not to display the scrambled icon in channel list.
1. Select Option in CH List using the button.
2. Select one option from On/Off using the OK or button.
On Scramble icon display in the channel list.
Off Scramble icon disappear from the channel list.
4. Instant replay time
You can set instant replay time to watch the programme from the 7, 15, or 30 seconds before.
1. Select Instant replay time using the button and press the OK or button.
2. Select one option among 7/15/30 using the button and press the OK button.
5. Commercial skip time
You can watch the programme from the time point 15,30 or 60 seconds forward from the current watching point.
1. Select Commercial skip time using the button and press the OK or button.
2. Select one option among 15/30/60 using the button and press the OK button.
9. Setting Preferences
GB 60