Humax PVR-9200T - Manual (Page 50)

**
2. Viewing Programme Information Using Time Bar
You can quickly search for your desired time zone using the Time bar.
1. Press the GUIDE button.
2. Press GREEN button to display Time Bar.
3. Select the each button using the button and press the OK
button to move as your desired amount of time. If you press
the button repeatedly, the same operation is repeated.
4. You can also use the FAST REWIND , FAST FORWARD
, COMMERCIAL SKIP and INSTANT REPLAY
buttons on the remote controller.
5. Each button functions as follows.
Now Moves to the current programme where the cursor is located.
Moves back to the previous programme or 30 minutes before.
Moves forwards to the next programme or 30 minutes ahead.
Moves back to 2 hours before.
Moves forwards to 2 hours ahead.
Day Moves back to one day before.
Day Moves forwards to one day ahead.
**
6. Select button and press the OK button to exit the Time Bar.
3. Scheduling recoding
You can automatically schedule recording by selecting the scheduled programme and pressing the OK button.
1. Select the desired programme and press the OK button to
complete reservation. This icon will be displayed. Press the
OK button again to cancel reservation.
2. If the channel is locked, restricted by parental control or restricted
by watching time, you will be prompted to enter your Password.
Enter your Password to complete the reservation.
GB 49