Dedicated ilo 2 port module option – HP PROLIANT DL320 G6 User Manual
Page 37
Advertising
Hardware options installation 37
9.
Route the cable, and then connect the SATA connector to the system board.
10.
Connect the power connector to the power supply backplane.
11.
Install the access panel.
12.
Install the server into the rack.
Dedicated iLO 2 port module option
To install the component:
1.
Power down the server (on page
2.
Remove the server from the rack (on page
3.
Remove the access panel (on page
4.
Press inward on the knockout.
5.
Twist and pull to remove the knockout from the chassis.
Advertising
This manual is related to the following products: