Expansion board option – HP PROLIANT DL320 G6 User Manual
Page 38
Advertising
Hardware options installation 38
6.
Using a T-15 Torx screwdriver, install the dedicated iLO 2 management port module.
7.
Install the access panel.
8.
Install the server into the rack.
Expansion board option
To install the component:
1.
Power down the server (on page
2.
Remove the server from the rack (on page
3.
Remove the access panel (on page
4.
Disconnect all internal cables connected to any existing expansion boards.
5.
Remove the PCI riser board assembly (on page
6.
Remove the expansion slot cover.
Advertising
This manual is related to the following products: