Honeywell GNS-XL - Manual (Page 145)

System Operation
3-30 GNS-X L Flight Management System
Rev. 0
Oct/96
NOTE: A list will appear with other available STARs.
4. Line Select Key - DEPRESS to position cursor over the desired
STAR.
5. ENT Key - DEPRESS to select desired STAR.
NOTE: Cursor moves to the first waypoint of the TRANSITION list
and the TRANSITION field is displayed in yellow.
6. Line Select Key - DEPRESS to position the cursor over the
desired transition waypoint.
7. ENT Key - DEPRESS to select the TRANSITION. If the STAR is
not runway dependent proceed to Step 10.
8. Line Select Key - DEPRESS to position the cursor over the
desired runway on the RUNWAY list.
NOTE: The RUNWAY can also be edited without changing the origi-
nal SID if the SID/TRANSITION are compatible. This is done by
pressing the Line Select Key adjacent to the RUNWAY field. Position
the cursor over the desired RUNWAY. Press ENT to load the desired
RUNWAY on the SID.
9. ENT Key - DEPRESS to select the RUNWAY.
10. Arrival STAR Waypoints - REVIEW, then DEPRESS ENT Key to
insert STAR into Active Flight Plan and return to the ACTIVE
FLIGHT PLAN Page.
ERASING A STAR FROM A STORED FPL OR THE ACTIVE FPL PAGE
1. Line Select Key -
DEPRESS to position
cursor over ARRIVE field
on the FLIGHT PLAN
Page.
2. ENT Key - DEPRESS.
3. Line Select Key -
DEPRESS to position
cursor over ERASE?
(Figure 3-49)
4. ENT Key - DEPRESS to
erase STAR and return
to FLIGHT PLAN Page.
RUNWAY -----
TRANSITION AVE
STAR MOOR3
WAYPOINTS OF STAR:
AVE FIM
DERBB PAULA
REYES ILEAN
PIRUE WAKER
ERASE?
ARRIVAL KLAX 1/1
>
>
>
Figure 3-49