Honeywell GNS-XL - Manual (Page 308)

EDITING/ENTERING A PREPROGRAMMED MESSAGE
6. TEXT - EDIT or ENTER using the following guidelines.
a. Entering a character causes the character at the cursor posi-
tion and all the characters to the right to be shifted one position.
b. The BACK Key may be
used to delete characters
one at a time from right to
left.
c. The SP Key may be
used as a spacer to sepa-
rate words.
d. The PRV Key may be
used to move the cursor
one space to the left.
e. The NXT Key may be
used to move the cursor
one space to the right.
CONTINUE SENDING MESSAGE
7. NXT Key - DEPRESS to
position cursor over the
SEND MESSAGE? field. It
will be necessary to press
the ENT Key after seven
lines of text in order for the
SEND MESSAGE? field to
appear. (Figure 7-76)
8. ENT Key - DEPRESS. The
message will be downlinked
and the AFIS MENU Page
will appear. TO, FROM and
# field information of SEND
MESSAGE Page will be
used in downlink message.
NOTE: DATA LINK DISABLED will appear in the SEND MES-
SAGE? field if the downlink is disabled.
Wait for DATA CENT AK message if sending multiple requests.
7-42 GNS-X L Flight Management System AFIS Operation
Rev. 0
Oct/96
PPM MENU
<
<
<
<
1 ETA CHANGE
2 FILE FLT PLAN REQ
3 HOTEL RESERVATIONS
4
5
6
Figure 7-75
ETA CHANGE
NEW ETA IS 1300 KPRC
HAVE A GOOD DAY
SEND MESSAGE?
< >
PREPROGRAMMED MSG
<
Figure 7-76