Humax LAU-32TPVR User Manual
Page 10
15. COMMON INTERFACE
16. SMARTCARD SLOT
17. MAIN POWER
1. AC INPUT
Connect the supplied AC power cord.
2. DVI INPUT
Connect to the digital video output jack of an external device with DVI output.
3. PC INPUT
Connect to the video output jack on your PC, using the PC cable supplied.
4. AUDIO INPUT
Connect to the audio output jack on your PC or your external device with DVI output.
5. RS-232C
Connect to the RS-232C port on your PC for software upgrade.
6. USB MASTER PORT
Connect to the USB port on an external HDD for moving the various digital data to/from an
external HDD.
7. AV1 IN, AV2 IN
Connect for the video and audio input to external devices with RCA cables.
8. AV-OUT
Connect for the video and audio output to external devices such as a VCR or DVD.
9. ANT IN (Antenna In)
Connect to your aerial for digital and analogue TV signal.
10. S/PDIF
Connect to Dolby digital decoder for the digital audio signal output.
11. H/P (Headphone)
Connect to your headphone.
12. AV3 IN
Connect for the video and audio input to external devices with RCA cable.
13. S-VIDEO
Connect to an external device with S-Video output.
14. COMPONENT
Connect to an external device with Component output, such as DVD.
15. COMMON INTERFACE
Use for one CA Module with a smart card.
16. SMARTCARD SLOT
Slot for Smartcard.
17. MAIN POWER
Main Power Button.
9. Rear Panel
13. S-VIDEO
Red3
: AUDIO : R
White : AUDIO : L
White : AUDIO : L
Yellow : VIDEO
11. H/P (Headphone)
Green : Y
Blue
: P
b
Red1
: P
r
AC INPUT
1
DVI INPUT
2
PC INPUT
3
AUDIO INPUT
4
RS-232C
5
USB MASTER PORT
6
AV1 IN
7
AV2 IN
7
AV OUT
8
ANT IN
9
Red2
: AUDIO : R
12. AV3 IN
14. COMPONENT
10. S/PDIF
75ⵕ
AV1 IN
AV2 IN
AV OUT
VIDEO
VIDEO
L - AUDIO - R
L - AUDIO - R
L - AUDIO - R
VIDEO