Remote control, Inserting the batteries – Humax LAU-32TPVR User Manual

Page 15

Advertising
background image

Remote Control

14. Remote Control

Inserting the Batteries

You must insert or replace the batteries in the remote control when you:

+ Purchase the TV.
+ Find that the remote control is no longer operating correctly.

1. Pull the battery cover upward in the arrow direction to remove.

2. Insert the batteries as illustrated in the battery compartment.

3. Put the battery cover back.

4. For Simple Remote Control, insert the batteries in the same way.

+ Apply two 1.5V batteries of AAA type. Don˅t mix used batteries with new

batteries.

+ Remove batteries when you don˅t use the remote control for long periods.

Liquid leakage from old batteries may cause operation failure.

Notes for using remote control

+ Make sure these are no objects between the remote control and its sensor.
+ Don
˅t place the remote control near a heater or damp place. Strong

impact on remote controller may cause operation failure.

+ The signal from the remote control may be subjected to interference

from sunlight or other strong light.

1

2

3

Pull

Lock

Push

Insert

Advertising