Humax LAU-32TPVR - Manual (Page 47)

This chapter describes functions such as switching channel, changing language,
and basic features for watching programmes.
Switching Channel
You can switch the current channel using one of the following methods.
1. Press the CH +/- button.
2. Enter your desired channel number using the NUMERICAL (0~9) button
to move to the channel directly.
3. Press the DTV CH or RADIO CH button to switch between TV channel
and Radio channel.
Note : You can switch channel using the channel list or programme guide.
Changing the Subtitle Language
If the current programme provides
Subtitle information, you can select the
language for the Subtitle.
1. Press the SUBTITLE button to
display the subtitle language list.
2. Select your desired subtitle language
using the ̵/̷ button, and press
the OK button. Then the subtitle
will be displayed in the selected
language at the bottom of the screen.
3. Select OFF from the subtitle language list if you do not wish to display subtitles
in the screen.
Note :
_ You can select a default subtitle language by selecting DTV SETUP -
Preferences - Local Setting - Subtitle Language menu.
_ In PIP/TWIN Input screen, the subtitle is not displayed.
Changing an Audio Language
If the current programme is available in
multiple audio languages, you can select
the language that you wish to listen in.
1. Press the SOUNDTRACK/AUDIO
button to display soundtrack list.
2. Select your desired audio language
using the ̵/̷Gand OK button
to change the audio soundtrack.
3. Select Audio preference(left, right,
stereo) using the ൖ/൘ buttons.
4. Press the EXIT or SOUNDTRACK/AUDIO button to exit the soundtrack list.
Basic Operation
46. Basic Operation